Organic Chemistry II · Conjugated systems
Diels-Alder reaction practice problems, with every answer worked out
The Diels–Alder reaction snaps a diene and an alkene together into a six-membered ring in one step. It is a common Orgo 2 final topic because one reaction tests a lot: shape (s-cis), electronics (good partners), drawing, stereochemistry, endo vs exo, and regiochemistry. This page takes those one at a time, with a picture for each, then gives you 12 practice problems that check your answer as you go.
Want to test yourself first? Practice Conjugated systems, including Diels–Alder, in the app. Chapters 1 and 11 are free with no login, and this is Chapter 11.
Try a practice problem nowJump to: what it is · the 5-question checklist · s-cis · good partners · drawing the product · stereochemistry · endo rule · regiochemistry · intramolecular · retro · working backwards · worked examples · practice · FAQ
What a Diels–Alder reaction is, in plain English
You need two partners. The diene has two C=C bonds separated by one single bond (C=C–C=C, a conjugated diene). The dienophile (“diene lover”) is an alkene or alkyne. When they react, the four diene carbons and the two dienophile carbons join into a ring of six: a cyclohexene.
- Why “[4+2]”: 4 atoms from the diene plus 2 atoms from the dienophile make the 6-membered ring. It is a cycloaddition because two molecules add together to form a ring.
- Bond bookkeeping: three π bonds go in (two from the diene, one from the dienophile). Out come two new σ bonds (diene C1 and C4 to the dienophile) and one new π bond (between diene C2 and C3). Trading two π bonds for two stronger σ bonds is what makes the reaction downhill.
- Concerted, one step: all the bonds break and form at the same time, in a cyclic flow of six electrons. There is no carbocation, no carbanion, no intermediate of any kind, so nothing can rearrange or rotate along the way. That single fact explains the stereochemistry rules later on.
Otto Diels and Kurt Alder won the 1950 Nobel Prize in Chemistry for it, and it is still one of the main ways chemists build six-membered rings.
The 5-question checklist for any Diels–Alder problem
Every Diels–Alder exam question is some mix of these five questions. Ask them in order.
- Can the diene get into the s-cis shape? If it is locked s-trans, or not conjugated, stop: no reaction. More on s-cis.
- Is the dienophile electron-poor? A C=O, C≡N or CO₂R on the C=C makes it fast. Good partners.
- Draw the ring. Number C1–C4, join C1 and C4 to the dienophile, move the C=C to C2–C3. Step by step.
- Stereochemistry. Cis stays cis, trans stays trans. If the diene is cyclic, put the dienophile’s groups endo. Stereo and endo.
- Regiochemistry. Both partners unsymmetrical? Use the ortho/para rule. Regiochemistry.
Rule 1: the diene has to be s-cis
The single bond in the middle of a diene (C2–C3) can rotate. The two shapes you get are named for that single bond (the “s”): s-trans, where the two C=C bonds point opposite ways, and s-cis, where they point the same way.
C1 and C4 both have to reach the dienophile at the same moment, so only the s-cis shape can react. For plain butadiene that is no problem: s-trans is a little more stable, but the middle bond rotates constantly, and the small amount of s-cis present at any moment reacts and gets replaced.
Trouble starts when something stops the rotation or makes s-cis miserable:
- Reacts
Buta-1,3-diene
Reacts. It sits mostly s-trans, but the middle bond rotates freely, so some s-cis is always there.
- Reacts
Cyclopentadiene
Reacts very fast. The ring locks it s-cis, so every collision has the right shape.
- Does not react
A fused bicyclic diene
Never reacts. The two C=C bonds sit in different fused rings, held pointing away from each other, so the diene is locked s-trans.
- Does not react
(2Z,4Z)-Hexa-2,4-diene
Does not react (OpenStax). In the s-cis shape its two inner methyl groups crash into each other.
Quick test: look at the C2–C3 bond. If it is in a ring together with both C=C bonds (cyclopentadiene, cyclohexa-1,3-diene), the diene is locked s-cis and reactive (cyclopentadiene especially fast). If the two C=C bonds are held pointing away from each other by a ring, it is locked s-trans and dead. If C2–C3 is a free single bond, it can rotate, so judge by crowding, not by how it is drawn.
Rule 2: electron-rich diene + electron-poor dienophile
In the normal Diels–Alder the diene is the electron donor and the dienophile is the electron acceptor. So:
- Good dienophiles have an electron-withdrawing group right on the C=C (or C≡C): a carbonyl (aldehyde, ketone, ester, anhydride), a nitrile, or a nitro group. More of them, or stronger ones, means faster.
- Good dienes are electron-rich: alkyl groups or an OCH₃ on the diene speed it up.
- Ethylene, with no activating group, is a poor dienophile. Butadiene and ethylene do react, but only under harsh conditions.
| Dienophile | Structure | Why it works |
|---|---|---|
| Tetracyanoethylene | (NC)₂C=C(CN)₂ | Four nitrile groups: extremely electron-poor |
| Maleic anhydride | cis C=C between two C=O in a five-membered ring | Two carbonyls, held cis |
| Benzoquinone | Six-membered ring with two C=O and two C=C | Each C=C sits between two carbonyls |
| Dimethyl acetylenedicarboxylate (DMAD) | CH₃O₂C–C≡C–CO₂CH₃ | Alkyne with two esters; gives a cyclohexa-1,4-diene |
| Propenal (acrolein) | CH₂=CH–CHO | One aldehyde |
| Ethyl or methyl propenoate (acrylates) | CH₂=CH–CO₂R | One ester |
| Propenenitrile (acrylonitrile) | CH₂=CH–C≡N | One nitrile |
| Ethylene | CH₂=CH₂ | No activating group: very slow |
How to draw the product, step by step
The easy mistake here is putting the double bond in the wrong place. Do it the same way every time.
Draw it in four moves: buta-1,3-diene + methyl acrylate
- Line them up. Draw the diene s-cis, shaped like a “C”, and put the dienophile’s C=C across the open side, like the missing side of a hexagon.
- Number the diene C1 to C4, starting at either end.
- Connect C1 and C4 to the two dienophile carbons (dashed lines). These are the two new σ bonds.
- Move the double bond. Erase both old C=C bonds and the dienophile’s C=C, then draw one C=C between C2 and C3. Every substituent rides along on the carbon it started on.
Result: methyl cyclohex-3-ene-1-carboxylate. Notice where the ester landed: on a ring carbon two bonds away from the C=C. Substituents from an alkene dienophile always end up on the two sp³ carbons across the ring from the new C=C, never on the double bond.
Two checks before you move on: count carbons (product = diene carbons + dienophile carbons, nothing lost), and count C=C bonds in the ring (exactly one if the dienophile was an alkene; two, across from each other, if it was an alkyne).
Drawing the ring gets automatic with reps. Practice Diels–Alder and every other Orgo chapter with feedback on each step.
Start practicing free3 days, every chapter. No card.
Stereochemistry: what goes in cis comes out cis
Because the Diels–Alder happens in one step, both new bonds form on the same face of the dienophile at the same time. Nothing can rotate in between. So the dienophile’s geometry is copied straight into the product (OpenStax calls the reaction stereospecific):
- Cis dienophile → cis substituents on the two new sp³ carbons (draw both on wedges, or both on dashes).
- Trans dienophile → trans substituents (one wedge, one dash), formed as a 50:50 pair of enantiomers because the diene can attack either face of the flat dienophile.
A cyclic dienophile like maleic anhydride is automatically cis, so its product always has a cis ring fusion.
The endo rule for cyclic dienes
When the diene is in a ring, like cyclopentadiene, the product is bicyclic. The CH₂ that sat between C1 and C4 of cyclopentadiene becomes a one-carbon bridge, and now the dienophile’s substituents can point two different ways:
- Endo: the substituents point away from the one-carbon CH₂ bridge, tucked under the new C=C.
- Exo: the substituents point toward the same side as the CH₂ bridge.
The endo rule: the endo product is usually the major one. In the endo transition state, the dienophile’s C=O (or C≡N) sits right underneath the diene. Its π bond gets a bit of extra overlap with the diene’s middle carbons, C2 and C3, which lowers the energy of that path. So endo forms faster. The exo product is usually a little more stable (less crowded), which makes endo the kinetic product: you get it because it forms fastest, not because it is lowest in energy.
How to draw endo every time: draw the bicyclic skeleton with the CH₂ bridge on top and the new C=C at the back. Put the dienophile’s groups pointing down, on the opposite side from the CH₂ bridge. Put their H atoms pointing out to the sides.
For the bicyclic products here, endo vs exo matters when a cyclic diene makes a bridge and the dienophile has a substituent. With butadiene there is no bridge, so use cis/trans instead.
Regiochemistry: the ortho/para rule
If both partners are unsymmetrical, they can line up two ways, giving two different constitutional isomers. One is usually favored; the size of the preference depends on the partners. A useful first rule is:
Substituent on C1 of the diene → 1,2 product (“ortho”).
Substituent on C2 of the diene → 1,4 product (“para”).
The 1,3 (“meta”) product is the minor one. The names are borrowed from benzene; the product is not aromatic.
Why it works: partial charges. Draw one resonance form for each partner and see where the charges land.
- Dienophile. Propenal: CH₂=CH–CH=O ↔ +CH₂–CH=CH–O−. The carbon far from the C=O is δ+.
- Diene with an OCH₃ on C1. CH₃O–CH=CH–CH=CH₂ ↔ CH₃O+=CH–CH=CH–CH₂−. The donor pushes electron density to the far end, C4, which is δ−.
- Diene with a donor on C2. CH₂=C(OCH₃)–CH=CH₂ ↔ −CH₂–C(=O+CH₃)–CH=CH₂. Now the δ− end is C1, the carbon right next to the donor.
δ− bonds to δ+. Follow that through and the donor group and the electron-withdrawing group end up 1,2 (for a C1 donor) or 1,4 (for a C2 donor).
Alkyl groups are weaker donors than OCH₃, so the preference is smaller, but it points the same way: (E)-penta-1,3-diene gives mostly the 1,2 product and isoprene (2-methylbuta-1,3-diene) gives mostly the 1,4 product.
Intramolecular Diels–Alder
If the diene and the dienophile are in the same molecule, joined by a chain (the tether) of 3 or 4 atoms, the molecule can fold up and react with itself. You make two rings at once: the new cyclohexene, plus a second five- or six-membered ring made by the tether. Keeping both partners in one molecule can make the reaction faster because they do not have to find each other. To draw the product, number the diene, find the dienophile carbons, and join C1 and C4 to them just as before; the tether then closes the second ring.
Retro-Diels–Alder
Run the reaction backwards with enough heat and a cyclohexene can split into a diene and a dienophile, breaking the same two σ bonds the forward reaction made. The classic case: cyclopentadiene reacts with itself at room temperature (one molecule is the diene, the other the dienophile) to give dicyclopentadiene. That is why chemists buy the dimer, heat it to about 170 °C to crack it back to cyclopentadiene, and distill the monomer off (it boils near 41 °C) right before use.
Spotting a Diels–Alder product and working backwards
On a synthesis question, a cyclohexene ring (or a bicyclic ring with a C=C) is a big hint that a Diels–Alder made it. To find the starting materials:
- Find the C=C in the six-membered ring. Its two carbons were C2 and C3 of the diene.
- The two carbons next to it (allylic) were C1 and C4 of the diene.
- Cut the two σ bonds from those allylic carbons to the other two ring carbons. Those two carbons were the dienophile.
- Put the π bonds back: C1=C2 and C3=C4 in the diene, and a C=C between the two dienophile carbons (or a C≡C if they still share a double bond in the product).
- Check it forward for regiochemistry and stereochemistry. If the ortho/para rule would give a different isomer, your route gives the wrong major product.
Worked examples
Example 1: 2,3-dimethylbuta-1,3-diene + maleic anhydride
- Diene check. Conjugated, and C2–C3 is a free single bond, so it can reach s-cis. The methyls are on C2 and C3, out of the way of the reacting ends, and they make the diene more electron-rich.
- Dienophile check. Maleic anhydride has two C=O groups on its C=C: an excellent dienophile.
- Draw. Join diene C1 and C4 to the two CH carbons of maleic anhydride. Move the C=C to C2–C3, which carry the methyl groups.
- Stereo. The anhydride ring holds its two carbonyls cis, so the two H atoms on the new sp³ carbons are cis (both wedges). The anhydride is cis-fused to the cyclohexene.
Answer: the cis-fused anhydride with a tetrasubstituted C=C, 5,6-dimethyl-3a,4,7,7a-tetrahydro-2-benzofuran-1,3-dione.
Example 2: cyclopentadiene + maleic anhydride (endo)
- Diene check. Cyclopentadiene is locked s-cis, so it is very fast; this reaction runs at room temperature and is a common teaching-lab experiment.
- Draw. C1 and C4 of the diene bond to the two dienophile carbons. The CH₂ of cyclopentadiene, which joined C1 and C4, is now a one-carbon bridge: the product is bicyclo[2.2.1]heptene. The C=C sits between old C2 and C3.
- Stereo. The anhydride is cis, so it stays cis.
- Endo. The anhydride ring points away from the CH₂ bridge, underneath the new C=C. Its two H atoms point toward the bridge side (exo).
Answer: the endo adduct, cis-5-norbornene-endo-2,3-dicarboxylic anhydride (endo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic anhydride).
Example 3: (E)-1-methoxybuta-1,3-diene + propenal (regiochemistry)
- Charges. The OCH₃ on C1 pushes electron density to C4 (δ−). The CHO pulls density from the far CH₂ of propenal (δ+).
- Line up δ− with δ+. Diene C4 bonds to the CH₂; diene C1 (with the OCH₃) bonds to the CH–CHO carbon.
- Draw. C=C between old C2 and C3. The OCH₃ carbon and the CHO carbon are now next to each other.
Answer: 2-methoxycyclohex-3-ene-1-carbaldehyde, the 1,2 (“ortho”) product, as the rule predicts for a C1 substituent.
Example 4: working backwards from methyl 4-methoxycyclohex-3-ene-1-carboxylate
- Find the ring C=C. One of its carbons carries the OCH₃, so the diene had an OCH₃ on C2 (an inner carbon).
- Cut the two bonds from the allylic carbons to the far side of the ring. The two carbons you remove are CH₂ and CH–CO₂CH₃: the dienophile was methyl acrylate.
- Rebuild the diene: CH₂=C(OCH₃)–CH=CH₂, 2-methoxybuta-1,3-diene.
- Check forward. A C2 donor gives the 1,4 (“para”) product. In the target the OCH₃ carbon and the ester carbon are 1,4 (count: OCH₃ carbon, then the other C=C carbon, then a CH₂, then the ester carbon). The route gives the right isomer.
Answer: 2-methoxybuta-1,3-diene + methyl acrylate.
Practice problems
12 problems in 7 rounds, in the same order as the checklist. Pick an answer and press Check answer to see if you are right and why. Every problem has a full solution underneath. Your score counts first tries only.
Round 1: Will it react?
Round 2: Dienophiles
Round 3: Draw the product
Round 4: Stereochemistry
Round 5: Endo or exo
Round 6: Regiochemistry
Round 7: Work backwards
Diels–Alder questions are common on Orgo 2 finals, sometimes inside a synthesis problem. Practice until the ring draws itself.
Start practicing free3 days, every chapter. No card.
FAQ
What makes a good diene and a good dienophile?
A good diene is conjugated, can sit s-cis, and is electron-rich: alkyl or OCH₃ groups on it speed things up. A good dienophile is electron-poor: a C=C or C≡C attached to a C=O, C≡N or CO₂R group. Ethylene alone reacts only under harsh conditions; maleic anhydride reacts readily.
Why does the diene have to be s-cis?
Both ends of the diene, C1 and C4, have to bond to the dienophile at the same time. Only in the s-cis shape do C1 and C4 point the same way. A diene locked s-trans by a ring can never react, and one whose s-cis shape is badly crowded, such as (2Z,4Z)-hexa-2,4-diene, does not react either.
What is the endo rule?
When a cyclic diene such as cyclopentadiene reacts, it gives a bicyclic product with two possible orientations. The endo product, with the dienophile’s C=O or CN groups pointing away from the one-carbon bridge and tucked under the new C=C, forms faster and is usually the major product, even though the exo product is often more stable.
How do you predict Diels–Alder regiochemistry?
Use the ortho/para rule. A diene with its substituent on C1 gives the 1,2 (“ortho”) product, and a diene with its substituent on C2 gives the 1,4 (“para”) product. The reason is partial charges: the diene end with the most negative charge bonds to the dienophile end with the most positive charge.
Is the Diels–Alder reaction stereospecific?
Yes. Both new bonds form at once on the same face of the dienophile, so its geometry is kept. A cis dienophile gives cis substituents in the product, and a trans dienophile gives trans substituents, formed as a pair of enantiomers.
What is a retro-Diels–Alder reaction?
It is the Diels–Alder run backwards: with enough heat, a cyclohexene breaks its two Diels–Alder sigma bonds and splits into a diene and a dienophile. The classic example is heating dicyclopentadiene to get fresh cyclopentadiene.
Ready to check what you just read? Practice Conjugated systems in the app. Chapters 1 and 11 are free with no login, and this is Chapter 11.
Try a practice problem nowSources
- OpenStax Organic Chemistry, 14.4 The Diels–Alder Cycloaddition Reaction and 14.5 Characteristics of the Diels–Alder Reaction (dienophiles, stereospecificity, endo rule, s-cis dienes)
- LibreTexts Organic Chemistry (Morsch et al.), 14.5 Characteristics of the Diels–Alder Reaction
- LibreTexts (Providence College Organic Chemistry II), 13.4 Diels–Alder Regio- and Stereoselectivity (ortho/para rule)
One reaction, five questions: s-cis, partners, ring, stereo, regio. Practice them until you do them without thinking.
Start practicing free3 days, every chapter. No card.