Organic Chemistry II · Final exam review

Organic Chemistry 2 final exam review: find your weak unit, then fix it

About 20 min read · Report a mistake

An Orgo 2 final throws a lot of reactions at you, but nearly all of them follow one of two patterns: an aromatic ring attacking an electrophile, or a nucleophile attacking a carbonyl carbon. This page starts with a 10-question diagnostic that tells you which unit is weakest. Then it gives each unit's rules, one worked example and the trap that costs the most points, and finishes with multistep synthesis problems.

Jump to: what's on the final · 10-question diagnostic · the two patterns · aromatic rings · aldehydes and ketones · acid derivatives · enolates · amines · synthesis problems · FAQ

Want to test yourself first? Practice Aldehydes and ketones, the center of most Orgo 2 finals, in the app. Chapters 1 and 11 are free with no login; this chapter opens with the free trial (email only, no card).

Try a practice problem now

What an Orgo 2 final usually covers

Second-semester courses differ in order and depth, but most finals pull from the same units. Use this map to match your syllabus to the sections below.

Orgo 2 final exam topics, typical questions and the idea behind each
UnitWhat the questions look likeThe idea that unlocks it
Aromaticity and EASIs it aromatic? Where does the next group go? Which order of steps makes the target?4n + 2 π electrons; donors send electrophiles ortho/para, withdrawers send them meta
Aldehydes and ketonesPredict acetal, imine, enamine, cyanohydrin, Wittig and hydride products; use a protecting groupA nucleophile adds to C=O, and there is no leaving group, so it stays added
Carboxylic acid derivativesRank reactivity, predict substitution products, pick the right reducing agentAdd, then kick out the leaving group; by direct substitution you only go down the reactivity ladder
Enolates, aldol and ClaisenMost acidic H, kinetic vs thermodynamic enolate, aldol and Claisen products, malonic and acetoacetic ester synthesisThe α-carbon becomes the nucleophile
AminesRank basicity, make an amine without overalkylation, Hofmann elimination, diazonium swapsHow available is the nitrogen lone pair?
Multistep synthesisReagents for a 2–4 step route, often with an Orgo 1 step mixed inWork backward from the target and watch the order of steps
Conjugated dienes and spectroscopyDiels–Alder products, 1,2 vs 1,4 addition, IR and NMR structure questionsNot drilled on this page; check how much your course includes

Diels–Alder is not covered on this page; for practice, see Diels-Alder reaction practice problems.

Orgo 1 still counts. Synthesis problems borrow Orgo 1 steps, so keep these handy instead of relearning them here: the alkene reactions cheat sheet, Markovnikov's rule practice problems, Grignard reaction practice problems (Grignards bridge both semesters), IR spectroscopy practice problems, and the Organic Chemistry 1 final exam review if your final is cumulative.

10-question diagnostic: find your weakest unit

Two questions per unit. Answer all ten before you start reviewing, then use the scorecard at the end to decide where your study time goes. Every answer explains itself, right or wrong, and each question has a full solution.

Question 1 · AromaticityWhich of these is aromatic?

Show solution

Answer: The cyclopentadienyl anion. Check four things: a ring, planar, every ring atom has a p orbital (conjugated all the way around), and 4n + 2 π electrons. Only the cyclopentadienyl anion passes all four: 6 π electrons in a flat, fully conjugated five-membered ring.

Question 2 · Directing groupsAnisole (methoxybenzene) is treated with HNO₃ and H₂SO₄. What is the main result?

Show solution

Answer: Mostly the ortho and para nitro products, para major. –OCH₃ is a strong resonance donor: activating and ortho/para directing. Nitration gives o- and p-nitroanisole, with para as the major product.

Question 3 · AcetalsCyclohexanone is heated with excess ethanol and a little acid, and the water is removed as it forms. What is the product?

Show solution

Answer: 1,1-Diethoxycyclohexane (an acetal). Acid-catalyzed addition of two alcohols to a ketone gives an acetal (C with two OR groups). The steps are reversible, so removing water drives it forward and adding aqueous acid takes it back to the ketone.

Question 4 · Imines and enaminesCyclohexanone reacts with methylamine (CH₃NH₂) in mildly acidic solution (about pH 4–5). What forms?

Show solution

Answer: An imine: C=N–CH₃ in place of the C=O. Primary amine plus aldehyde or ketone gives an imine (C=N–R). Secondary amine gives an enamine (C=C–NR₂). The rate is best in mild acid, around pH 4–5.

Question 5 · Reactivity orderRank these from most to least reactive toward nucleophilic acyl substitution.

Show solution

Answer: Acid chloride > anhydride > ester > amide. Acid chloride > anhydride > ester ≈ carboxylic acid > amide. By direct nucleophilic acyl substitution, a derivative turns into ones below it on this ladder, not above it. Making an acid chloride from the acid with SOCl₂ is a separate activation step (see the acid derivatives section).

Question 6 · Esters and GrignardsMethyl benzoate is treated with excess CH₃MgBr, then aqueous acid. What is the major product?

Show solution

Answer: 2-Phenylpropan-2-ol. Esters (and acid chlorides) react with two equivalents of Grignard reagent: substitution gives a ketone, then addition gives a tertiary alcohol with two identical new R groups.

Question 7 · α-AcidityWhich compound has the most acidic α-hydrogen?

Show solution

Answer: Pentane-2,4-dione (CH₃COCH₂COCH₃). α-Hydrogens between two carbonyls (pKa 9–13) are far more acidic than those next to one ketone (about 19) or one ester (about 25). That is why malonic ester and acetoacetic ester are so easy to alkylate.

Question 8 · Kinetic enolates2-Methylcyclohexanone is treated with LDA in THF at −78 °C, then with CH₃I. What is the major product?

Show solution

Answer: 2,6-Dimethylcyclohexanone. LDA at low temperature forms the less substituted (kinetic) enolate. Alkylation then happens on the less substituted α-carbon: 2,6-dimethylcyclohexanone.

Question 9 · BasicityWhich compound is the strongest base?

Show solution

Answer: Cyclohexylamine. Alkylamines are the strongest bases here. Aniline is weaker (lone pair in the ring), and pyrrole and amides are much weaker still because their N lone pair is delocalized.

Question 10 · Making aminesWhat is the best way to make N-methylbenzylamine, C₆H₅CH₂NHCH₃?

Show solution

Answer: Benzaldehyde + CH₃NH₂, then NaBH₃CN (reductive amination). Reductive amination (carbonyl + amine, then NaBH₃CN or NaBH(OAc)₃) is the cleanest way to make 2° and 3° amines. It avoids the overalkylation problem of SN2 on alkyl halides.

Your scorecard (first try on each question)

Check answers above and your results by unit show up here. Start your review with the lowest unit.

The two patterns behind almost every Orgo 2 reaction

Before memorizing reagents, sort each reaction into one of these. It tells you where the arrows go.

1. The ring is the nucleophile

In electrophilic aromatic substitution, the π electrons of benzene attack a strong electrophile (Br⁺ from Br₂/FeBr₃, NO₂⁺, an acylium ion). That makes a positively charged intermediate (the arenium ion, or sigma complex). The ring then loses H⁺ to get its aromaticity back, so the result is substitution, not addition.

Groups already on the ring change how fast this happens and where it happens.

2. The carbonyl carbon is the electrophile

C=O is polarized, so a nucleophile attacks the carbon. What happens next depends on what is attached:

No leaving group (aldehydes, ketones): the nucleophile stays. That is addition.
A leaving group (acid chlorides, anhydrides, esters, amides): the C=O re-forms and kicks it out. That is substitution.
Flip it: remove an α-hydrogen and the carbonyl compound becomes the nucleophile (an enolate). That is aldol and Claisen chemistry.

Unit 1

Aromaticity and electrophilic aromatic substitution

Is it aromatic? Four checks

  1. It is a ring.
  2. It is flat (planar).
  3. Every atom in the ring has a p orbital, so the ring is conjugated all the way around. One sp³ carbon breaks it.
  4. It has 4n + 2 π electrons: 2, 6, 10, 14 and so on.

Pass all four and it is aromatic. A flat, fully conjugated ring with 4n π electrons (4, 8) is antiaromatic and unusually unstable. Anything that fails the planar or conjugation check is just nonaromatic. Count a lone pair as π electrons only if it sits in a p orbital that is part of the ring: pyrrole's N lone pair counts (6 π total), but pyridine's does not, because it points out of the ring in an sp² orbital.

The five EAS reactions

Electrophilic aromatic substitution: reagents, electrophiles and limits
ReactionReagentsElectrophileWatch out for
HalogenationBr₂, FeBr₃ or Cl₂, FeCl₃Polarized Br–Br–FeBr₃ (acts like Br⁺)Benzene needs the Lewis acid; without it there's no reaction
NitrationHNO₃, H₂SO₄NO₂⁺ (nitronium ion)Reduce –NO₂ to –NH₂ later with Fe or SnCl₂ and HCl, or H₂/Pd. That flips a meta director into an ortho/para director
SulfonationSO₃, H₂SO₄ (fuming sulfuric acid)HSO₃⁺ or SO₃Reversible, so –SO₃H can be used as a temporary blocking group
Friedel–Crafts alkylationR–Cl, AlCl₃Carbocation (or a complex that acts like one)Rearranges; can add more than once; fails on strongly deactivated rings and on –NH₂ rings
Friedel–Crafts acylationRCOCl, AlCl₃Acylium ion, R–C≡O⁺No rearrangement, and it stops after one, because the ketone deactivates the ring. Same ring limits as alkylation

Directing groups in one table

How substituents change the rate and position of electrophilic aromatic substitution
Group typeExamplesRate vs benzeneSends the next group to
Lone pair on the atom attached to the ring–NH₂, –NHR, –OH, –OR, –NHCORFaster (activating)Ortho and para
Alkyl groups–CH₃, –CH₂CH₃A little faster (weakly activating)Ortho and para
Halogens–F, –Cl, –Br, –ISlower (weakly deactivating)Ortho and para
Electron-withdrawing groups (pull electron density out of the ring)–NO₂, –CN, –CHO, –COR, –COOH, –COOR, –SO₃H, –CF₃, –NR₃⁺Slower (deactivating)Meta

A quick way to remember it: all activators are ortho/para directors, all deactivators except halogens are meta directors. Halogens are the exception because induction slows the reaction but their lone pairs still stabilize the ortho and para intermediates.

Worked example 1: two groups on the ring

4-Nitrotoluene (CH₃ on C1, NO₂ on C4) is treated with Br₂ and FeBr₃. Where does Br go?

  1. CH₃ is an ortho/para director. Para (C4) is taken, so it points at C2 and C6.
  2. NO₂ is a meta director. Meta to C4 are C2 and C6.
  3. Both groups point at the same carbons, and C2 and C6 are equivalent by symmetry.

Product: 2-bromo-1-methyl-4-nitrobenzene (2-bromo-4-nitrotoluene).

When the two groups disagree, the stronger activator wins (for example –OH beats –CH₃). And a new group rarely goes into the crowded spot between two groups that are meta to each other.

Trap: Friedel–Crafts on the wrong ring. If the ring already has a meta director (–NO₂, C=O and similar) or an –NH₂ group, Friedel–Crafts fails. The amine reacts with AlCl₃ instead. On a synthesis question, do the Friedel–Crafts step before you add the deactivating group.

For more on this unit, with 16 practice problems, see electrophilic aromatic substitution practice problems.

Directing group sorter

For each group, pick whether it speeds up or slows down EAS compared with benzene, and where it sends the next group. Check them all at once; each row tells you what's off.

–OH

–NH₂

–CH₃

–NHCOCH₃ (acetamido)

–Br

–NO₂

–COCH₃ (acetyl)

–CN

–SO₃H

–N(CH₃)₃⁺

Show all answers

Activating, ortho/para: –OH, –NH₂, –CH₃, –NHCOCH₃. Deactivating but ortho/para: –Br. Deactivating, meta: –NO₂, –COCH₃, –CN, –SO₃H, –N(CH₃)₃⁺.

Unit 2

Aldehydes and ketones: nucleophilic addition

Aldehydes are more reactive than ketones: they have less steric crowding around the C=O and only one alkyl group donating electron density. Strong nucleophiles (hydride, Grignards) add and stay. Weaker ones (water, alcohols, amines) add reversibly, usually with acid catalysis, and what you isolate depends on the conditions.

Nucleophiles that add to aldehydes and ketones and what they give
ReagentProductNotes
NaBH₄ or LiAlH₄, then workupAlcohol (aldehyde → 1°, ketone → 2°)Irreversible. NaBH₄ leaves esters alone; LiAlH₄ does not
RMgBr or RLi, then H₃O⁺Alcohol with a new C–C bondFull set of cases in the Grignard guide
HCN (or NaCN with a little acid)Cyanohydrin, C(OH)CNReversible. The CN can later become COOH or CH₂NH₂
H₂OHydrate (gem-diol)Reversible; for most ketones the equilibrium favors the ketone
2 ROH, acid catalyst, remove waterAcetal, C(OR)₂Goes through a hemiacetal. Stable to base and hydrides; aqueous acid reverses it
RNH₂ (primary amine), pH 4–5Imine, C=N–RLoses water. Reduce it with NaBH₃CN to get an amine
R₂NH (secondary amine), acid catalystEnamine, C=C–NR₂N has no H left, so the H comes off the α-carbon
Ph₃P=CHR (Wittig ylide)Alkene; C=O becomes C=CHRThe new C=C goes exactly where the C=O was

Worked example 2: making a cyclic acetal, step by step

Cyclohexanone plus ethylene glycol (HOCH₂CH₂OH) with a catalytic acid such as TsOH, with water removed as it forms.

  1. Acid protonates the C=O oxygen, which makes the carbon much more electrophilic.
  2. One OH of ethylene glycol attacks the carbon. Losing H⁺ gives the hemiacetal (one OH and one OR on the same carbon).
  3. Acid protonates the remaining OH, and it leaves as water. The oxygen of the OR group pushes in to make an oxocarbenium ion (C=O⁺R).
  4. The second OH of the same glycol attacks, closing a five-membered ring. Losing H⁺ gives the acetal.

Product: 1,4-dioxaspiro[4.5]decane, the ethylene glycol acetal of cyclohexanone.

Every step is reversible. Removing water pushes it forward, and adding aqueous acid runs it backward to the ketone. That's why acetals are the standard ketone protecting group (synthesis problem 3 below uses one).

Trap: imine vs enamine. Count the H atoms on the amine nitrogen. Primary amine (RNH₂): an H is left on N after water leaves, so it comes off N and you get C=N. Secondary amine (R₂NH): no H is left on N, so the H comes off the neighboring carbon and you get C=C–N.

Unit 3

Carboxylic acid derivatives: nucleophilic acyl substitution

Every reaction here has the same two steps: the nucleophile adds to the C=O to make a tetrahedral intermediate, then the C=O re-forms and kicks out the leaving group. How easily that happens depends on how good the leaving group is.

  1. Acid chloride RCOCl, leaving group Cl⁻ (most reactive)
  2. Acid anhydride (RCO)₂O, leaving group RCOO⁻
  3. Ester RCOOR′ (and the acid itself), leaving group R′O⁻
  4. Amide RCONH₂, leaving group ⁻NH₂ (least reactive)

The downhill rule: under ordinary nucleophilic acyl substitution conditions, a direct substitution turns a derivative into one below it on the ladder, not one above it (OpenStax 21.2). An acid chloride gives an anhydride, ester or amide easily. Going up takes a separate route: SOCl₂ activates a carboxylic acid by turning its OH into a much better leaving group, giving the acid chloride (OpenStax 21.3). So amide to acid chloride means hydrolyzing to the carboxylic acid first, then using SOCl₂.

Reagents that come up most often with esters, amides, nitriles and acids
Starting material + reagentProduct
RCOOH + SOCl₂Acid chloride, RCOCl
RCOOH + R′OH, H⁺ (Fischer esterification)Ester + water, an equilibrium. Use excess alcohol or remove water
Ester + NaOH, H₂O (saponification), then H₃O⁺Carboxylic acid + alcohol. The basic step is irreversible because it forms the carboxylate
Ester + LiAlH₄, then workupTwo alcohols: the acyl part becomes RCH₂OH
Ester + 1 equivalent DIBAL-H at −78 °C, then workupAldehyde, RCHO (stops after one hydride)
Ester + 2 R″MgBr, then H₃O⁺Tertiary alcohol with two identical R″ groups
Amide + LiAlH₄, then workupAmine: the C=O becomes CH₂
Nitrile + H₃O⁺, heatCarboxylic acid
Nitrile + LiAlH₄, then workupPrimary amine, RCH₂NH₂
Nitrile + R″MgBr, then H₃O⁺Ketone, RCOR″

Worked example 3: one acid chloride, seven reagents

Propanoyl chloride, CH₃CH₂COCl, sits at the top of the ladder, so it reacts with almost everything. Predict each product.

Products of propanoyl chloride with each reagent
ReagentProductWhy
H₂OPropanoic acid + HClWater substitutes for Cl
CH₃OH, pyridineMethyl propanoatePyridine soaks up the HCl
NH₃ (2 equivalents)Propanamide + NH₄ClThe second NH₃ neutralizes the HCl
(CH₃)₂CuLiButan-2-oneGilman reagents add once and stop at the ketone
2 CH₃MgBr, then H₃O⁺2-Methylbutan-2-olSubstitution gives the ketone, then a second addition
LiAlH₄, then workupPropan-1-olTwo hydrides: to the aldehyde, then to the alcohol
LiAl(OtBu)₃H at −78 °CPropanalA mild, bulky hydride adds only once

Trap: "add one equivalent of Grignard to an ester to make a ketone." It doesn't work: the ketone that forms is more reactive than the ester, so it grabs a second R group. For a ketone, use a Gilman reagent on an acid chloride, or a Grignard on a nitrile.

Unit 4

Enolates, aldol and Claisen

A hydrogen on the carbon next to a C=O (the α-carbon) is acidic, because the anion left behind spreads its charge onto oxygen. That anion, the enolate, is a carbon nucleophile.

Approximate pKa of α-hydrogens
CompoundExamplepKa (about)
EsterCH₃COOCH₂CH₃25
KetoneCH₃COCH₃19
AldehydeCH₃CHO17
Malonic ester (CH₂ between two esters)CH₂(COOCH₂CH₃)₂13
β-Keto esterCH₃COCH₂COOCH₂CH₃11
1,3-DiketoneCH₃COCH₂COCH₃9

Choosing the base. LDA (lithium diisopropylamide) is strong enough to turn a ketone completely into its enolate. It is bulky, so at −78 °C it takes the more accessible H and gives the kinetic (less substituted) enolate. A smaller base under conditions that let things equilibrate gives more of the thermodynamic (more substituted) enolate. NaOH or NaOEt makes only a little enolate from a simple ketone, which is enough for aldol reactions, and they fully deprotonate 1,3-dicarbonyls.

The reactions, and how to spot each product

Enolate reactions and the product pattern that gives each one away
ReactionWhat happensProduct pattern
α-AlkylationEnolate + CH₃X or 1° RX (SN2)New alkyl group on the α-carbon
Aldol additionEnolate adds to an aldehyde or ketone C=Oβ-Hydroxy carbonyl
Aldol condensationAldol product loses water with heatα,β-Unsaturated carbonyl (enone)
Claisen condensationEster enolate substitutes on another ester (NaOR base)β-Keto ester
Dieckmann cyclizationIntramolecular Claisen of a diesterCyclic β-keto ester (5- or 6-membered ring)
Michael additionStabilized enolate adds to the β-carbon of an enone1,5-Dicarbonyl
Malonic ester synthesisAlkylate, then H₃O⁺ and heat (loses CO₂)R–CH₂COOH
Acetoacetic ester synthesisAlkylate, then H₃O⁺ and heat (loses CO₂)CH₃COCH₂–R (a methyl ketone)

Worked example 4: an aldol forward, then backward

Forward. Propanal (CH₃CH₂CHO) is treated with NaOH, then heated.

  1. NaOH removes an α-H (on C2), giving the enolate CH₃CH⁻–CHO.
  2. That α-carbon attacks the C=O carbon of a second propanal. After protonation: CH₃CH₂CH(OH)–CH(CH₃)–CHO, which is 3-hydroxy-2-methylpentanal (the aldol addition product).
  3. Heating removes the α-H and the β-OH as water, making a C=C conjugated with the C=O.

Product: 2-methylpent-2-enal, CH₃CH₂CH=C(CH₃)CHO.

Backward. To find the starting material for any enone, break the C=C between the α and β carbons. Put a C=O back on the β carbon. The α side came from the enolate. Here both halves are propanal, so it was a self-aldol. Synthesis problem 4 below has you do this on your own.

Trap: aldol vs Claisen. Aldol joins two aldehydes or ketones by addition and keeps the oxygen as OH (or loses it as water). Claisen joins two esters by substitution, loses an alkoxide, and gives a ketone β to the ester. If you see a β-keto ester, think Claisen; if you see a β-hydroxy carbonyl or an enone, think aldol.

For more on aldols, with 17 practice problems, see aldol reaction and aldol condensation practice.

Unit 5

Amines

Almost every amine question comes down to one thing: how available is the nitrogen lone pair? The more available it is, the more basic and nucleophilic the amine.

Worked example 5: rank five bases

Rank from strongest to weakest base: aniline, ammonia, cyclohexylamine, pyridine, pyrrole. (Higher pKa of the conjugate acid means a stronger base.)

  1. Cyclohexylamine (conjugate acid pKa about 10.6): an alkyl group donates electron density and the lone pair isn't delocalized.
  2. Ammonia (about 9.3): no alkyl groups to help.
  3. Pyridine (about 5.2): the lone pair is in an sp² orbital, held closer to the nucleus than an sp³ lone pair. It is not part of the aromatic π system, though, so it can still take a proton.
  4. Aniline (about 4.6): the lone pair is delocalized into the benzene ring.
  5. Pyrrole (well under 1): the lone pair is one of the ring's 6 aromatic π electrons. Protonating it would cost the aromaticity.

Order: cyclohexylamine > ammonia > pyridine > aniline > pyrrole.

Withdrawing groups on an aniline ring (–NO₂) make it even weaker; donating groups (–OCH₃) make it a little stronger. Amides are not basic at all.

Ways to make amines and when to use each
MethodReagentsBest for
Reductive aminationAldehyde or ketone + NH₃ or an amine, then NaBH₃CN1°, 2° or 3° amines with no overalkylation
Gabriel synthesisPotassium phthalimide + 1° RX, then hydrazine (or hydrolysis)Clean primary amines
Azide routeNaN₃ + RX (SN2), then LiAlH₄Primary amines
Nitrile or amide reductionLiAlH₄, then workupNitrile: RCH₂NH₂ (adds a carbon). Amide: C=O becomes CH₂
Nitro reductionFe or SnCl₂ with HCl, or H₂/PdAnilines from nitrobenzenes

Two amine reactions that show up in synthesis. Hofmann elimination: excess CH₃I turns the amine into a quaternary ammonium salt, then Ag₂O and heat cause an E2 that forms the less substituted alkene (the opposite of Zaitsev). Diazonium salts: ArNH₂ + NaNO₂ and HCl at 0 °C gives ArN₂⁺, which you can swap for Cl or Br (CuCl, CuBr), CN (CuCN), I (KI), OH (water, heat), F (HBF₄, heat) or H (H₃PO₂). Together with nitration and reduction, that lets you put a group on a ring in positions EAS alone can't reach.

Trap: making an amine by SN2 with an alkyl halide. The product amine is usually at least as nucleophilic as the starting one, so the reaction keeps going and you get a mixture. On an exam, reach for reductive amination or the Gabriel synthesis instead.

A page of review goes further with daily reps. The app has Aromatic reactions, Aldehydes and ketones, Acids and derivatives, Enols and enolates, and Amines as their own chapters, with arrow-pushing problems for each.

Start practicing free

3 days, every chapter. No card.

Synthesis planning: 5 multistep problems

Synthesis questions are where Orgo 2 finals separate grades, because one problem can test three units at once. Three habits help: work backward from the target one bond at a time, decide the order of steps before picking reagents (especially on aromatic rings), and protect any group that the next reagent would wreck.

Problem 1 · Order of stepsWhich sequence turns benzene into 1-bromo-3-nitrobenzene (m-bromonitrobenzene)?

Show solution

Answer: 1. HNO₃, H₂SO₄ 2. Br₂, FeBr₃. Look at the relationship between the groups in the target. Meta means the first group must be a meta director, so put –NO₂ on first, then brominate.

Problem 2 · Friedel–Crafts trapsWhich route makes propylbenzene (C₆H₅CH₂CH₂CH₃) from benzene cleanly?

Show solution

Answer: 1. CH₃CH₂COCl, AlCl₃ 2. Zn(Hg), HCl (or H₂, Pd/C). Straight-chain alkylbenzenes come from Friedel–Crafts acylation followed by reduction. Direct alkylation with a primary halide rearranges.

Problem 3 · Protecting groupsHow would you convert ethyl 4-oxocyclohexane-1-carboxylate into 4-(hydroxymethyl)cyclohexan-1-one, reducing the ester but keeping the ketone?

Show solution

Answer: 1. HOCH₂CH₂OH, TsOH 2. LiAlH₄, then H₂O 3. H₃O⁺. When a stronger reagent would hit two groups, protect the more reactive one first. Acetals survive bases, hydrides and Grignards and come off with aqueous acid.

Problem 4 · Aldol disconnectionWhich aldehyde gives 2-ethylhex-2-enal when heated with NaOH (self-aldol condensation)?

Show solution

Answer: Butanal. For an α,β-unsaturated carbonyl, break the C=C: the α side came from the enolate and the β carbon was the electrophilic C=O. If both halves are the same, it was a self-aldol.

Problem 5 · Acetoacetic ester synthesisEthyl acetoacetate is treated with 1. NaOEt, 2. CH₃CH₂Br, 3. H₃O⁺, heat. What is the final product?

Show solution

Answer: Pentan-2-one. Acetoacetic ester synthesis turns R–X into CH₃COCH₂–R, a methyl ketone. Malonic ester synthesis turns R–X into R–CH₂COOH.

Frequently asked questions

What is on an Organic Chemistry 2 final?

Most Orgo 2 finals cover conjugated systems and Diels–Alder, aromaticity and electrophilic aromatic substitution, aldehydes and ketones, carboxylic acids and their derivatives, enolate chemistry such as aldol and Claisen reactions, and amines, plus spectroscopy and multistep synthesis. Orgo 1 reactions often come back inside synthesis problems. Check your syllabus for which chapters count.

Is Orgo 2 harder than Orgo 1?

Many students find it heavier because there are more reactions and the synthesis problems mix both semesters. It is also more connected. Most Orgo 2 reactions are either an aromatic ring attacking an electrophile or a nucleophile attacking a carbonyl carbon, so learning those two patterns well makes the rest easier.

How should I study for my Orgo 2 final?

Start with a short diagnostic to find your weakest unit and spend most of your time there. Rewrite each reaction as nucleophile plus electrophile instead of memorizing it alone, and practice synthesis problems by working backward from the target. Do mixed problems rather than one chapter at a time, because the final mixes them.

Is this the same as the ACS organic chemistry exam?

The ACS organic chemistry exam is a standardized multiple-choice test from the American Chemical Society Examinations Institute, and some schools use it as the Orgo 2 final. The full-year version covers both semesters. The topics here overlap heavily with its second-semester content, so this page works as review for it, but pair it with an Orgo 1 review.

Ready to check what you just read? Practice Aldehydes and ketones in the app. Chapters 1 and 11 are free with no login; this chapter opens with the free trial (email only, no card).

Try a practice problem now

Sources

Orgo 2 finals reward reps on mixed problems more than rereading. Practice both semesters, chapter by chapter, with feedback on every arrow.

Start practicing free

3 days, every chapter. No card.